Did you know about this hot wood product?
Tuesday 24 Apr 2018
Thermal modification is achieved by using steam and high temperatures in excess of 190 degrees celsius. The real trick to the process is in the cooling and reconditioning phase. The modification process requires a purpose-built computer-controlled kiln to ensure every piece of timber is modified to the correct specification and quality. At the end of the process the moisture content of the timber is around 7% moisture content and the chemical and physical properties have been permanently changed.
During the thermal modification process, many of the extractives are “cooked” out of the wood so that there is little chance of ‘resin bleed’ in service. This, combined with a degrading of the hemicellulose (sugar compound) in the wood, means that the conditions for fungal growth are almost eliminated. As a result the durability of softwoods like radiata pine is increased to equivalent of H3 level – providing a 30 year expected service life in above ground vertical (cladding) applications. As an added advantage, thermal insulation properties are improved by around 20%.
All this is achieved without the use of wood preservatives or chemicals of any type. Thermally modified wood is perfect for eco decking, cladding and weatherboard applications, especially where “healthy” building materials are desired.
Abodo’s Vulcan Cladding is made from FSC certified clear wood modified at 230 degrees. Vulcan Cladding is available in a range bevel back, rusticated and vertical shiplap weatherboard profiles. The Vulcan system is CodeMark certified for compliance with the New Zealand building code.
In the image above, standard pine is shown on the left, thermally modified pine is on the right.
Copyright 2004-2019 © Innovatek Ltd. All rights reserved.